HOW TO OPERATE YOUR DISHWASHER
Your dishwasher is designed give maximum
performance on loads with normal
heavy soils.
You
find that
your dishes have lighter
soils than normal; this is the case you can save
water
energy by selecting a
other than
NORMAL WASH.
NOTE: The lights over the Cycle and Energy Option
pads come ON to indicate the cycle/option that has
been selected. Press pad
until the light comes
on. These Cycle and Energy Option Indicator lights
remain on
the door is latched.
The CYCLE ON light will come on when the
dishwasher is in a Start Delay, Wash or Dry cycle.
The light will go out when all cycles are complete.
If dishwasher drains into a food waste disposal,
operate the disposal until it is empty before starting
dishwasher.
1.
Load your dishwasher. (See Loading section.)
Make sure the Cycle Indicator Dial is at
the OFF position and the CYCLE ON light is off,
indicating
cycles are complete.
Latch the door.
Select desired wash cycle.
●
items such as pots, pans
and casseroles with dried-on or baked-on soils.
Everyday dishes may be included. This cycle will
get heavily soiled dishes cleaner than the normal
cycle. It will not remove burned-on foods.
●
NORMAL WASH—For most loads of everyday
dishes, glasses and cookware with medium
Designed to yield high performance on normal soils.
●
LIGHT WASH—For loads that have dishes with
light soils.
●
WATER SAVER—For dishes with
soils. This
cycle saves water by using
less water than the
NORMAL WASH cycle.
Select the desired Energy Options.
WASH HEAT
this option for
best performance with heavily-soiled dishes.
When selected, the wash cycle is extended while
the dishwasher heats the water
the best washing
drying. (See Cycle Selection Chart. )
●
HEATED DRY—Turns the drying heater on for
fast drying. When selected, the cycle time will be
extended
minutes.
4
Cycles
Energy
●
HEATED DRY off—Shuts off the heating unit,
thus saving energy. Dishes air-dry naturally. It takes
longer but saves energy. You can open the door after
the motor stops to speed drying. Excellent for
overnight drying.
●
OPTIONS RESET—Turns all Energy Options
6.
Turn the Cycle Indicator Dial to START
or to the desired START DELAY time.
●
Turning the dial to START
begin the cycle
immediately, To obtain the benefits of a complete
cycle, be careful that you do not turn the
any
farther than is necessary to start the dishwasher.
There is a time delay between start-up and water
so you will not hear any wash action right away.
●
The START DELAY
you to delay the
start time of your dishwasher automatically for up
to 6 hours. Turn the Cycle Indicator Dial to the
desired time. The CYCLE ON
come on.
Dial Cycles
The SHORT WASH cycle allows you to quickly
wash
everyday dishes with medium soils
that have not dried on, such as loads consisting mostly
of glasses.
used with
Select the NORMAL WASH cycle and any
Energy Option if desired.
b. Be sure the door is unlatched.
c. Slowly turn the
Indicator Dial to
SHORT WASH.
d. Latch the door to start the cycle.
