4 of 13
P/N 1069667 • REV 1.0 • ISS 22FEB10
Logon to the Console
Once the terminal has connected to the device, power on the GE-DSG/GE-DSSG
Managed Switch, the terminal will display that it is running testing procedures.
Then, the following message asks for the password. The factory default password
for the login screen is:
• Password:
admin
Figure 3: Managed Switch Console Login screen
Note:
For security reasons, please change and memorize the new password after
this first setup. Passwords must be entered in lowercase letters in the console
interface.
Configure IP address
The GE-DSG/GE-DSSG Managed Switch is shipped with default IP address as
follows:
• IP Address : 192.168.0.100
• Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the following procedures:
