12 /
GE Title or job number /
8/2/2011
Features - Cycles
The auto cycle and normal cycle both utilize the turbidity sensor to adjust the wash
parameters of different segments. Normal cycle has the ability to skip segments
where as Auto cycle is a little more rigid structure and modifies main wash length.
Normal cycle time : 68
– 94 minutes
Auto cycle time: 62
– 90 minutes
Normal & Auto cycles w/Added Heat : 106
– 116 minutes
Sanitize cycle : 51- 132 minutes.
Deep Clean : 119
– 174 minutes
Plastics: 87-154 minutes
Pots n Pans: 81-140 minutes
Light cycle time : 38 – 68 minutes
*NOTE:
Fill: 16 sec. - 65 sec.
Drain: 7 sec.
– 105 sec. (Final Rinse)
Dry: 8 min.
(Speed cycle) up to 60 min. (Plastic Cycle)
* Times Vary based on cycle, turbidity, temperature.
Summary of Contents for GDWT668V
