Installation Instructions
REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles – on some models)
Stainless steel (on some models):
REMOVING
THE DOOR
HANDLE: Loosen
the set screws
with the 3/32
″
Allen wrench
and remove
the handle.
NOTE:
For Double Door
models follow the
same procedure
on the opposite
door.
REVERSING THE
DOOR HANDLE:
•
Remove the
handle mounting fasteners with a 1/4
″
Allen
wrench and transfer the handle mounting
fasteners to the right side.
•
Remove and transfer the plug button and
logo badge to the left side of the fresh food
door.
NOTE:
Use a flat plastic edge to prevent
damaging the door. Remove any adhesive on
the door with a mild detergent. Remove the
paper covering on the adhesive backing on
the logo badge prior to carefully attaching the
badge to the door.
Plastic handle (on some models):
REMOVING
THE DOOR
HANDLE: Slide
the handle up
on the handle
mounting
fasteners and
remove the
handle.
REVERSING THE
DOOR HANDLE:
•
Remove the
handle
mounting
fasteners with a
3/8
″
or 10 mm
socket wrench and transfer the handle
mounting fasteners to the right side.
•
Remove and transfer the plug button and
logo badge to the left side of the fresh food
door.
NOTE:
Use a flat plastic edge to prevent
damaging the door. Remove any adhesive on
the door with a mild detergent. Remove the
paper covering on the adhesive backing on
the logo badge prior to carefully attaching the
badge to the door.
A
A
5
After removing the handle:
Move the small plug
button from the top right side of the door top and
insert it into the hole on the opposite side.
Small
Plug
Button
A
B
A
B
Mounting
Fasteners
Mounting Fasteners
Plug
Button
Plug
Button
(appearance may vary)
Badge
Badge
(appearance may vary)
(appearance may vary)
REMOVE THE FREEZER DOOR
HANDLE
Stainless steel handle:
Loosen the set screws located on the underside
of the handle with the 3/32
″
Allen wrench and
remove the handle.
NOTE:
If the handle mounting fasteners need to
be tightened or removed use a 1/4
″
Allen wrench.
Plastic handle:
Slide the handle to the right on the handle
mounting fasteners and remove the handle.
NOTE:
If the handle mounting fasteners need to
be tightened or removed use a 3/8
″
or 10 mm
socket wrench.
A
A
6
A
A
A
A
Mounting
fasteners
Slots on back
of handle
(appearance may vary)
A
19
