GE GDF510PGDBB, Manual, Page: 31 / 119

31 /
Copyright General Electric 2011
9/23/2012
Error Code Mode:
Select
Cycle
Start Press and hold 5 seconds
Door Status Check (test will last for 10 seconds)
LED’s Solid
Indicates door is closed
LED’s Flashing Indicates door is open
LED Error Type Error Causes
Start Communications
Failure User Interface control is unable to communicate with
the machine control.
Heated Dry Wash Temperature
Error The minimum wash temperature of 120
°
F was not
reached during 3 of the past 5 wash cycles.
Wash Boost Thermistor Error Control is detecting a short or open circuit at the
thermistor.
Clean Turbidity Sensor
Error Control is detecting a short or open circuit at the
turbidity sensor.
Lock Always Illuminated Illuminates to tell user that Diagnostic Code Display
Mode is active.