GE GDF500-620 Series, Owner'S Manual

Page: 8 / 66

8
49-55117
Getting started
USING THE DISHW
A
SHER
Start Dishwasher
Start Door can be open to select the desired options. Press the Start pad and close the door within
10 seconds to start the cycle or begin the Delay Hours countdown. The wash cycle will begin
shortly after closing the door. If the door is open, the illuminated lights will turn off if a pad is not
pressed within two minutes. To activate the display, close and open the door or press any pad.
Interrupt or
Pause To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart
or resume the cycle, press
Start , and close the door within 4 seconds.
Cancel To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
6
Cycle Indicator Lights and Sounds
Sanitized Displayed at end of the cycle when Wash Temp Sani (Sanitize) has been selected and
dishwasher has met requirements for sanitization. See Wash Temp Sani (Sanitize) , for
complete description. Opening the door or pressing any key while the door is closed will turn off
the light.
Clean Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
clean. Opening the door or pressing any key while the door is closed will turn the light off.
Sabbath/
Door
Wake Up
Mode
(on some
models)
To turn this option ON/OFF, press and hold the Start and Wash Temp pads for 5 seconds,
close the door and wait 3 minutes for the dishwasher to go into sleep mode. In the OFF mode,
the control display, control sounds, and interior lights (on some models) will not respond to the
door opening/closing. This mode can be used when observing certain religious holidays such as
the Sabbath. To activate the control and interior lights
(on some models) , press any button.
7