GE GCV06GSNBSB, Owner'S Manual & Installation Instructions, Page: 6 / 16

6
49-1000398 Rev. 1
Care and Cleaning
Directions for Cleaning Outside Surfaces, Door Handles, and Trim
Cleaning the Inside
To help prevent odors
OHDYHDQRSHQER[RIEDNLQJVRGDLQWKHIUHVKIRRGDQGIUHH]HU
compartments.
Remove power from refrigerator before cleaning.
(LWKHUGLVFRQQHFWPDLQ'&SRZHUVXSSO\ZLUHVDWUHDURIXQLWUHPRYHUHIULJHUDWRUFLUFXLW
IXVHRUWXUQRIIFLUFXLWEUHDNHULQ'&YROWDJHGLVWULEXWLRQSDQHO,IWKLVLVQRWSUDFWLFDOZULQJ
excess moisture out of sponge or cloth when cleaning around switches, lights or controls.
Use warm water and baking soda solution
²DERXWDWDEOHVSRRQPORIEDNLQJVRGD
WRDTXDUWOLWHURIZDWHU7KLVERWKFOHDQVDQGQHXWUDOL]HVRGRUV5LQVHDQGZLSHGU\
Other parts of the refrigerator —including door gaskets, fruit and vegetable drawers, and
all plastic parts—can be cleaned the same way.
After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets at
WKHKLQJHVLGH7KLVKHOSVNHHSWKHJDVNHWVIURPVWLFNLQJDQGEHQGLQJRXWRIVKDSH'RQRW
use cleansing powders or other abrasive cleaners.
CAUTION
'RQRWFOHDQJODVVVKHOYHVRUFRYHUVZLWKZDUPZDWHUZKHQWKH\DUH
cold. Glass shelves and covers may break if exposed to sudden temperature changes or
impact such as bumping or dropping. Tempered glass is designed to shatter into many
small pieces if it breaks.
'RQRWZDVKDQ\SODVWLFUHIULJHUDWRUSDUWVLQWKHGLVKZDVKHU
DO USE DO NOT USE
Soft, clean cloth or sponge Abrasive cloths, scrubbing sponges,
scouring or steel wool pads
Mild detergent mixed with warm water
$SSURYHGVWDLQOHVVVWHHOFOHDQHUV
Visit the Café Appliances parts store
for approved stainless steel cleaners:
geapplianceparts.com or call
Cleaners with oxalic acid such as
%DU.HHSHUV)ULHQG6RIW&OHDQVHUŒ
can be used to remove surface rust,
tarnish and small blemishes.
Abrasive powders or sprays
Window Sprays or Ammonia
Citrus or plant oil-based cleaners
Acidic or vinegar-based cleaners
Oven cleaners
Cleaners containing acetone (propanone)
Any cleaner with WARNING about plastic
contact
NOTE: DO NOT allow stainless steel cleaner to come in contact with any plastic parts
such as trim pieces, handle hardware and liners. If unintentional contact of cleaners
with plastic parts does occur, clean plastic part with a sponge and mild detergent
mixed with warm water.