About the dishwasher control panel.
GEAppliances.ca
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance
may vary from your model.
Control Settings
Wash Cycles
(vary depending on model)
POTS & PANS
For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may
COOKWARE
be included. This cycle will not remove burned-on foods.
SUPER
For heavily soiled dishes or cookware. For dried-on or baked-on soils, use the POTS & PANS
cycle. Everyday dishes may be included.
NORMAL
For loads of everyday dishes, glasses and cookware with medium soils.
NOTE:
Many dishes have
lighter soil than normal. Choosing a cycle other than
NORMAL WASH
will save energy and water.
LIGHT
For dishes with light soils.
CHINA
For lightly soiled china and crystal, use the
CHINA
cycle.
RINSE
For rinsing partial loads that will be washed later.
DO NOT
use detergent or
HEATED DRY
OPTION.
PLATE WARMER
For warming clean dishes and serving plates. This cycle will take approximately 36 minutes.
Options
HEATED DRY ON
Turns the heating element on for fast drying. This option will extend the time of your wash cycle.
HEATED DRY OFF
Turns
HEATED DRY ON
off. Dishes air dry naturally and energy is saved.
EXTRA HEAT
Wash temperature will be a little higher.
HOT START
Wash time will be a little longer, and initial wash temperature will be higher.
DELAY
You can select 2, 4 or 8 hours later to start the dishwasher.
Start
Slowly turn the Dial to the
desired
position on the Dial after selecting a drying option. Don’t turn it
past that position, or you could accidentally miss a rinse. There is a time delay between start-up and
water fill so you will not hear any wash action right away.
Electronic models:
After selecting wash cycle and options, press the Start button.
1
2
3
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
5
