4
49-5000090
USING THE
A
IR CONDITIONER
Controls
Features and appearance will vary.
Lights below the touch pads on the air conditioner control panel indicate the selected settings.
Air Conditioner Controls
Remote Control
Note: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to degree Celcius (°C),
press the Temp In and Temp Decrease - buttons together and hold for 3 seconds. Repeat the process to change back to
degree Fahrenheit (°F)
Power Pad
Turns air conditioner on and off. When turned on, the
display will show the room temperature.
Display
Shows the room temperature or time remaining on the
Delay timer. Shows the
Set
temperature while setting
the temperature in
Heat
,
Cool
or
ECO
modes.
Temp In /Decrease –
Pads
8VHWRVHWWHPSHUDWXUHZKHQLQ
Heat
,
Cool
or
ECO
mode
. The
Set
light will turn on while setting.
Delay In /Decrease –
Pads
Each touch of the In / Decrease - pads on
the unit or the In / Decrease – pads on the
remote control will set the delay time when using the
Delay 1–24hr
timer. The
Set
light will turn on while
setting.
Fan Speed Pads
8VHWRVHWWKHIDQVSHHGWR
Low
,
Med
,
High
or
Auto
on the unit.
NOTE:
On the remote control,
use the fan speed In / Decrease – pads to
set the fan speeds to
Low
,
Med
or
High
8VHWKH
Auto
pad to turn
Auto
fan on.
Mode Pad
8VHWRVHWWKHDLUFRQGLWLRQHUWR
Heat
,
Cool
,
ECO
or
Fan Only
mode.
WiFI
Enables connection of the air conditioner to the home
WiFi. Download App for details at
GEAppliances.com/
connect
.
Filter Reset Pad
LED will turn on when fan has accumulated 250 hours
of run time as a reminder to clean filter. Press Reset
Filter to turn off the LED and reset the accumulated
run time.
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
Fan
Fan
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Auto Fan on
Fan speed
Increase
8QLWSRZHU
on/off
Auto
High
Med
Low
Cool
Fan
Eco
Reset
Filter
Fan
Mode
Power
WiFi
8
Light indicates
WiFi connection
Light indicates the unit is in
the temperature set mode.
