IEEE 488 Option
© 2017 General Electric Company – All Rights Reserved.
ADTS 405 R/F Mk2 Instruction Manual-English | 45
c.
The ADTS 405 Mk2 file system directories (under folder fs\etfs) are visible in the right
hand pane as shown in Figure 4-11 file system directories screen below:
Figure 4-11: ADTS File System Directories Screen
The example ETP (Test Programs) directory can be seen to contain two default test
programs, “altosc” and “asposc”, used for oscillation of altitude and airspeed. New
prepared programs may be added from the PC left panes by drag and drop to the ETP
directory. They will then become available for stand-alone use under the front panel
ETP key. Unwanted programs may be deleted from the ETP directory as required.
Similarly, any reports previously generated using the “PRINT” key will be available
under the “SPOOL” directory. This may be transfer to the PC window for archive or
hard copy print as required.
d.
The access session can now be closed using the Win SCP “Session” tab > Disconnect.
4.14 IEEE 488 Option
4.14.1 Enabling the IEEE 488 Option
Use the configuration menu to enable and disable the IEEE 488 facility. To enable the
IEEE 488 facility, set the ADTS 405 Mk2 to the SCPI IEEE option and set the Address to 1 as
follows:
