GE Double Wall Oven Owner'S Manual Download Page 12

12

CARE AND CLE

ANING

Cleaning The Oven

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

Control Panel

Flat Racks

It’s a good idea to wipe the control panel after each use. 
Clean with mild soap and water or vinegar and water, 
rinse with clean water and polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleansers, 
plastic scouring pads or oven cleaners on the control 
panel—they will damage the finish. 

Flat racks can be left in the cavity during self-clean 
(if enameled racks, not shiny) or can be washed with 
warm, soapy water.

Racks may be more difficult to slide, especially after 
a self-clean. Put some vegetable oil on a soft cloth or 
paper towel and rub onto the left and right edges.

Oven Exterior

Oven Interior

Do not use oven cleaners, abrasive cleansers, strong 
liquid cleansers, steel wool, plastic scouring pads, or 
cleaning powders on the interior or exterior of the oven. 
Clean with a mild soap and water or vinegar and water 
solution. Rinse with clean water and dry with a soft cloth. 
When cleaning surfaces, make sure that they are at 
room temperature and not in direct sunlight.

If stain on the door vent trim is persistent, use a mild 
abrasive cleaner and a sponge-scrubber for best results.

Spillage of marinades, fruit juices, tomato sauces and 
basting liquids containing acids may cause discoloration 
and should be wiped up immediately. Let hot surfaces 
cool, then clean and rinse.

The interior of your new oven can be cleaned manually 
or by using the Steam Clean or Self Clean modes.

Spillage of marinades, fruit juices, tomato sauces and 
basting liquids containing acids may cause discoloration 
and should be wiped up immediately. Let hot surfaces 
cool, then clean and rinse.

Manual Cleaning

Do not use oven cleaners, abrasive cleaners, strong 
liquid cleansers, steel wool, scouring pads, or cleaning 
powders on the interior of the oven. Clean with a mild 
soap and water or vinegar and water solution. Rinse with 
clean water and dry with a soft cloth. When cleaning 
surfaces, make sure that they are at room temperature 
and not in direct sunlight.

Steam Clean Mode

Steam clean is intended to clean small spills using water 
and a lower cleaning temperature than Self-Clean. 

To use the Steam Clean feature, wipe grease and soils 
from the oven. Pour one cup of water into the bottom of 
the oven. Close the door. Press the 

Clean

 pad 

twice

 

and then press 

Start

. The oven door will lock. You can 

not open the door during the 30 minute steam clean as 

this will decrease the steam clean performance. At the 
end of the steam clean cycle the door will unlock. Wipe 
out any excess water and any remaining dirt.

Self Clean Mode

Read Self-Cleaning Oven Safety Instructions at the 
beginning of this manual before using Self Clean Mode. 
Self clean uses very high temperatures to clean the oven 
interior. The oven door will lock when using this feature. 
Before operating the self-clean cycle, wipe up grease and 
soils from the oven. Remove all items from the oven other 
than enameled (dark color) racks. Shiny or silver racks, 
the meat probe, and any cookware or other items should 
all be removed from the oven before initiating a self-clean 
cycle. Close the door. Press the 

Clean

 pad once and a 

default self-clean time is displayed. The clean time can 
be changed to any time between 3:00 and 5:00 hours 
by using the number pads to enter a different time and 
pressing Start. If you wish to use the default time, press 
the 

Start

 pad immediately after pressing the 

Clean

 pad. 

The oven will turn off automatically when the self-clean 
cycle is complete. The door will stay locked until the oven 
has cooled down. After the oven has cooled down wipe 
any ash out of the oven.

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm sudsy 
water or a stainless steel cleaner or polish. Always wipe 
the surface in the direction of the grain. Follow the cleaner 
instructions for cleaning the stainless steel surface.

To inquire about purchasing cleaning products including 
stainless steel appliance cleaner or polish read the 
Assistance and Accessories sections at the beginning of 
this manual. 

Stainless Steel Surfaces (on some models)

Summary of Contents for Double Wall Oven

















Reviews: