GE DigitalFlow XMT868i, Startup Manual

Page: 40 / 96

Chapter 2. Initial Setup
32 DigitalFlow™ XMT868i Startup Guide
2.3.1c Programming Mass Flow Data
1. Scroll to the desired Mass Flow Units for flow rate display (see Table 7 below), and press
[Enter]
.
2. Scroll to the desired Mass Flow Time Units (from seconds to days), and press
[Enter]
.
3. Scroll to the desired number of Decimal Digits (digits to the right of the decimal point) in the mass flow rate
display, and press
[Enter]
.
4. Scroll to the desired Mass Totals (units for the totalized mass flow rate display and press
[Enter]
.
5. Scroll to the desired number of Mass Decimal Digits (digits to the right of the decimal point) in the totalized
mass flow rate display, and press
[Enter]
.
The program varies, depending on whether or not you have enabled the Energy Option .
•
If you have not enabled the Energy Option , the XMT868i returns to the
Global PROGRAM
window. Press
[Escape]
to return to the
PROG
menu and scroll to the
Channel PROGRAM
.
•
If you have enabled the Energy Option , continue to the next page.
Table 7: Available Mass Flow Units
English Metric
LB = Pounds KG = Kilograms
KLB = KiloPounds (Thousands of Pounds) Tonne = Metric Tons (1000 KG)
MMLB = MegaPounds
TONS (2000 LB)