GE DewPro MMY31, Installation And Operation Manual

Page: 22 / 36

Optional Display/User Interface 4-1
September 2005
Installation
If the DewPro is equipped with an optional display/user interface,
follow the procedure below to access the buttons.
Figure 4-1: Dewpro with Display
Removing the Display
1.
Unscrew and remove the protective windowed lid from the
DewPro (as shown in Figure 4-1 above), exposing the display
module below. The buttons
V , H , + and – are now accessible.
2.
The display unit snaps onto the printed circuit board, resting on
four posts. When removing the display, push one post to the
outside, using a small screwdriver, and pull the display out.
3. Then unplug the display cable.
S
en
sin
g