GE DDE8200S, Use And Care Manual

Page: 7 / 20

-
and
I
Set the Controls —
Controls and features will vary from model to model.
See Suggested Fabric and Drying Selections guide.
Drying Selections.
Select the proper heat for
your load.
Should
be used with cycles indicated
●
Automatic
Drying
Automatic Perm. Press and
Timed
Selections
cycle Cycles Cycles
Cottons
High Heat
● ●
, Perm. Press
Medium Heat
● ●
Low Heat
● ●
No Heat*
●
*Huff-No Heat option can be used with an automatic cycle, but for
best performance it is recommended to be used with a timed cycle.
NOTE:
Drying times will vary according to the
type of heat used (Electric, Natural gas or
gas), size of
types of fabrics, wetness of
clothes, and condition of exhaust ducts.
Cycle Selector.
Turn the Cycle Selector to the
desired cycle setting. The selector may be turned
in either direction.
Care Cycle.
Operates only with the Automatic
Perm. Press and cycles. For
and
press the
pad, to select. For
models 8580S
turn the
control to SET. To minimize
setting in clothes, the Extra Care cycle provides
approximately 15 minutes of no-heat tumbling after
the clothes are dry. Use End Cycle Signal if your
dryer has one. Signal will sound to remind you to
remove the
End Cycle Signal.
Set End Signal, if desired.
For
models and
DDG8585S
press the pad, to select. For
turn the
control to
desired level.
On and
DDG8585S
select
Options
if you wish to
change an option.
For
models and
press the to Start
button to start the dryer. For
models
and
turn the
Start to start the dryer.
(Opening the door during operation stops the
dryer. To restart, close the door and follow above
directions.)
Check the Lint Sort
and Load the Clothes
Clean the lint filter each time the dryer is used. Good sorting for the dryer begins at the washer.
Always be sure the lint filter is in place. Don’t use
Generally, if clothes are sorted right for washing,
the dryer without it. See the Care and Cleaning section.
they’re sorted right for drying. See the How to Sort
the Clothes section. If you do mix various types of
fabrics in your load, set the controls for the
weight fabrics and remove when dry. Reset controls
for the remaining heavier fabrics.
7