GE DDE8200G, Use And Care Manual, Page: 12 / 16

The Problem
(continued)
PROBLEM
WRINKLING IN
PERMANENT PRESS
AND “NO-IRON”
ITEMS (continued)
POSSIBLE CAUSE AND REMEDY
●
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
●
Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
To remove
wrinkles:
.
on “Permanent Press” setting.
. and dry on “Permanent Press” setting.
. If unsuccessful, on high heat for 10-12 minutes and hang immediately.
. Iron carefully.
Send to dry cleaners for pressing.
●
Some may remain which cannot be removed?
If you laundry procedures and Permanent press clothes
out the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If need more call. toll free:
GE Answer Center”” ‘
consumer information service
12