Tools Needed
A
screwdriver is needed to reverse the dryer door.
the side of the opening
on the opposite side of the
2. With the door
completely open,
remove the bottom
screw from each hinge
on the dryer face.
opening by moving the door
in and down until the top
hinge and the bottom hinge
are resting on the top screws
,
inserted in step 3.
Dryer Door
1.
the door and remove the filler
6. Rotate the door 180°. Insert it
—
/
3. Insert these screws
about half way into
-- ,
the top holes, for
each hinge, on the
\
—-
7. Remove the remaining
screws from the side of
the opening from which
the door was removed.
opposite side. (Where
With these screws,
you removed the filler plugs.)
4. Loosen the top screw from
secure each hinge at
the bottom.
.
each hinge on-the dryer face
half way.
5. With one hand holding the top
of the door and the other hand
holding the bottom, remove the
door
the dryer by lifting it up and out.
8. Tighten the two top
screws of each hinge.
9. Reinsert the plastic plugs on
the side from which the door was removed.
11