GE DDE6608L, User And Care, Page: 4 / 16

(continued)
●
Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
●
If yours is a gas dryer, it is
equipped with an automatic electric
ignition and does not have a pilot
light. DO
TO
LIGHT WITH A Burns
may result from having your hand
in the vicinity of the burner when
the automatic ignition may turn on.
Dryer-applied fabric
softeners or
conditioners
You may wish to soften your
laundered fabrics or reduce the
electricity in them. We
recommend you use either a
fabric softener in the wash cycle,
according to the manufacturer’s
instructions for those products,
or try a dryer-added product for
which the manufacturer gives
written assurance on the package
that their product can be safely
used in your dryer.
How to your dryer
WARNING-To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating the appliance.
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
SAVE THESE
I
COTTONS
HIGH
HEAT
PERMANENT
DE
I
10W HEAT
TO START
Your Dryer Properly
●
Clean the lint filter each time the
dryer is used. Always be sure the
lint filter is in place. Don’t use the
dryer without it.
●
Good sorting for the dryer begins
at the washer. Generally, if clothes
are sorted right for washing, they’re
sorted right for drying. See page 8
for sorting help. (If you do mix
various types of fabrics in your
load, set the controls for the
lighter-weight fabrics and remove
when dry. Reset controls for the
remaining heavier fabrics. )
Set the Controls
See the Controls Setting Guide
on pages 6 and 7.
Fabric Care Selections
Push a button to select the proper heat for your load.
Should be used with cycles indicated
●
Automatic,
Fabric Care
Automatic Perm Press and
Timed
Selections
Regular Cycle Knits Cycle
Cycle
-
Cottons
High
Heat
●
●
Perm Press
Medium
Heat
● ●
Low Heat
● ●
Fluff
No Heat
●
Select Press PUSH
if desired.
to start dryer. (Opening the door
Turn Cycle Selector to desired
during operation stops the dryer.
Tore-start, close the door and
cycle setting. The selector may be
turned in either direction.
press the START button.)
4