Installation Instructions
10
14. Place the door on its edge. Assemble the 2 machine
screws (#8), washers, and nuts. Tighten using a
wrench and screwdriver.
15. Place the hinge cover in position. Align the hinge cover holes
with the holes in the door.
.
IMPORTANT:
Make sure there is no dirt or any other foreign
material in between the window panes.
18. Place the outer door onto the inner door.
17. Place the plastic cover onto the inner door and lock
in place with the 4 tabs.
REINSTALL NUTS AND HINGE COVER
REASSEMBLE DOOR ASSEMBLY
19. After reversing door, there will be a mismatch between the
outer door and the inner door.
Make sure that the handle part of the outer door is opposite
the hinge as shown.
16. Secure the hinge cover with the 2 tapping screws (#8).
Outer
Door
Inner
Door
Top of Door
