background image

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

2

California Safe Drinking Water and Toxic Enforcement Act

This act requires the governor of California to publish a list of substances known to the state to  

cause cancer, birth defects or other reproductive harm and requires businesses to warn customers  

of potential exposure to such substances.
Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon 

monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas  

or LP fuels.
Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be 

minimized further by properly venting the dryer to the outdoors.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk 

of fire or explosion, electric shock, or to prevent property damage, personal injury, or 

death. 

FOR YOUR SAFETY:
Do not store or use gasoline or other flammable vapors and 

liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualified installer, service agency or  

the gas supplier.

FOR GAS DRYERS: YOU MUST POST IN A PROMINENT LOCATION

1.

 

 Instructions to follow if the user smells gas: Contact your local gas 

supplier for information to be displayed.

2.

 

 Instructions concerning flammable materials as follows:

Consumer Support

Operating Instructions

Safety Instructions

Care and Cleaning

Summary of Contents for DCCB330EJWC













Reviews: