IMPORTANT
Start by removing the clear plastic tab
from the back of the switch.
1. Remove existing wallplate.
2. Get multi-gang wallplate (purchased separately).
3. Use new wallplate to mark the location for holes to be drilled.
4. Using 7/32” bit, drill holes in wall for mounting screws.
Insert drywall anchors.
5. Secure the switch to the wall until level and flush.
6. Screw on the faceplate cover onto the bracket.
STEP 2 - Mounting with screws/single-gang wallplate
Installing Your Switch
Summary of Contents for CWLSWDMBWF1
