GE CTF878, User & Service Manual

Page: 21 / 72

February 2009
2-2 Resetting and Updating
Resetting to Factory
Default Parameters
For various reasons, you might wish to return the CTF878 to its
original settings. The Factory Defaults option enables you to return
the meter to its preprogrammed default settings. To enter the option,
scroll down to the Factory Defaults entry in the Service Menu and
press
[ENTER]
. The screen will appear similar to Figure 2-2 below.
IMPORTANT:
All sites and logs will be lost if you use the Factory
Defaults option.
Figure 2-2: The Factory Defaults Option
1.
To restore Factory Default settings:
•
Press
[F2]
(Cancel) to return to Operate Mode without changing
the current settings.
•
Press
[F3]
(OK) to confirm that you wish to restore the factory
default settings.
2.
The program asks for confirmation: “Are you SURE?” Repeat the
procedure shown in Step 1 above.
The CTF878 replaces the default site file and the global meter
settings with the factory default settings, and returns to Operate
Mode.
Site Program Meter Logging
OK
*** WARNING ***
You will LOSE all changes by
pressing OK.
Choose CANCEL to exit or OK to
proceed.
Cancel
Service
Factory Defaults