GE CTF878 Programming Manual Download Page 69

Page: 69 / 116

Creating and Managing Sites

3-9

February 2009

Renaming a Site

If you want to rename a site, first be sure the site has been highlighted
in the left window of the Site Manager. Then press

[MENU]

to enter the

File Menu, scroll to the Rename option, and press

[ENTER]

. The screen

appears similar to Figure 3-9 below.

Figure 3-9: Rename Site Window

Use the four arrow keys to scroll to the desired letter or number, and
press

[ENTER]

. Repeat this procedure until you have created the

desired site name. (Press

[F1]

, Delete, to remove any unwanted letters

or numbers.) When you have finished,

•

Press

[F2]

(Cancel) to erase the entry, or

•

Press

[F3]

(OK) to confirm the entry.

The CTF878 remains in Site Manager, with the site listed under the
new name.

Cancel

Delete

SITE03

Rename Site

Summary of Contents for CTF878





















































































































Search results

Summary of Contents for CTF878

Reviews:

Related manuals for CTF878

Brands by name

Popular brands

GE CTF878, Programming Manual

Search results

Summary of Contents for CTF878

Reviews:

Related manuals for CTF878

Brands by name

Popular brands