GE CTF878 Programming Manual Download Page 66

Page: 66 / 116

February 2009

3-6

Creating and Managing Sites

Opening an Existing Site

If you want to return to a site you have previously saved, first
highlight the replacement site in the left window of the Site Manager.
Then press

[MENU]

to open the File Menu. Scroll to the Open option,

and press

[ENTER]

. The screen appears similar to Figure 3-6 below.

Figure 3-6: Open Site Confirmation Window

•

Press

[F2]

(No) to cancel opening the site and return to the

current site, or

•

Press

[F3]

(Yes) to open the site.

If you have changed the current site, the CTF878 asks if you want to
save the changes to the previously opened site.

•

Press

[F2]

(No) to cancel the changes, or

•

Press

[F3]

(Yes) to confirm and save the changes.

The CTF878 returns to Operate Mode, with the selected site
displayed in the upper left corner of the screen.

Yes

Open File 'SITE03.SIT'
Are You Sure?

Site Manager

Open Confirmation

Summary of Contents for CTF878





















































































































Search results

Summary of Contents for CTF878

Reviews:

Related manuals for CTF878

Brands by name

Popular brands

GE CTF878, Programming Manual

Search results

Summary of Contents for CTF878

Reviews:

Related manuals for CTF878

Brands by name

Popular brands