GE Coin-Operated Commercial Tumble Action Washer Installation Instructions And Use & Care Manual Download Page 3

3

Grounding type
wall receptacle

Power supply

cord with 3-prong

grounding plug

Do not under
any circumstances
cut, remove,
or bypass
the grounding prong
from this plug.

 

Do not use or mix

liquid chlorine bleach with
other household chemicals
such as toilet cleaners, rust
removers, acid or products
containing ammonia. These
mixtures can produce
dangerous fumes which can
cause serious injury or death.

 Avoid fire

hazard or electrical shock.
Do not use an adaptor plug
or extension cord or
remove grounding prong
from electrical power cord.
Failure to follow this
warning can cause serious
injury, fire or death.

Read all instructions before using this washer.

Important Safety Instructions

CORRECT Use this way ONLY

 

 

You can be killed or seriously injured if you don't follow these Important Safety Instructions:

• To reduce the risk of fire, electrical shock, or injury to persons when using this washer, comply with the basic warnings listed below.
• Failure to comply with these warnings could result in serious personal injuries.

Prevent Fire

•  Do not wash items that have been previously cleaned in, soaked in, or spotted with gasoline, cleaning solvents, kerosene, cooking

oils, waxes, etc. Do not store these items on or near the washer. These substances give off vapors or chemical reactions that could
ignite or explode.

•  Do not put oily or greasy rags or clothing on top of the washer.  These substances give off vapors that could ignite the materials.
•  Do not add gasoline, cleaning solvents, or other flammable or explosive substances to the wash water.  These substances give

off vapors that could ignite or explode.

FOR YOUR SAFETY  

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or

any other appliance.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.

HYDROGEN GAS IS EXPLOSIVE.

  If the hot water system has not been used for such a period, before using the washer, turn

on all hot water faucets and let the water flow from each for several minutes.  This will release any accumulated hydrogen gas.
Hydrogen gas is flammable; do not smoke or use an open flame during this time.

• Failure to comply with these warnings could result in fire, explosion, serious bodily injury and/or damage to the rubber or plastic

parts of the washer.

Protect Children

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

As children grow, teach them the proper, safe use of all appliances.

• Destroy the carton, plastic bag and other packing materials after the washer is unpacked. Children might use them for play. Cartons

covered with rugs, bedspreads or plastic sheets can become airtight chambers.

• Keep laundry products out of children's reach. To prevent personal injury, observe all warnings on product labels.
• Before the washer is removed from service or discarded, remove the washer lid to prevent accidental entrapment.
• Failure to comply with these warnings could result in serious personal injuries.

Prevent Injury

• Test door interlock system daily. Follow instructions on previous page.
• To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a qualified

service person in accordance with local codes.  Refer to INSTALLATION AND SAFETY INSTRUCTIONS for detailed grounding
procedures. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person.

• To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a properly

grounded and polarized 3-prong outlet. 

The third grounding prong must never be removed. Never ground the washer to

a gas pipe. Do not use an extension cord or an adaptor plug.

• Follow package directions when using laundry products.  Incorrect usage can produce poisonous gas--resulting in serious injury

or death.

- Do not  

combine laundry products for use in 1 load unless specified on the label.

- Do not

 mix chlorine bleach with ammonia or acids such as vinegar.

• To prevent serious personal injury and damage to the washer:

- All repairs and servicing must be performed by an authorized servicer 

unless specifically recommended in this

INSTALLATION AND SAFETY INSTRUCTIONS manual. Use only authorized factory parts.

- Do not

 tamper with controls.

- Do not  

install or store the washer where it will be exposed to the weather.

 

To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance.

Turning the controls to the OFF position does not disconnect this appliance from the power supply.

• To prevent injury, do not reach into the washer while parts are moving.  Before loading, unloading or adding items, push in the cycle

selector knob and allow the tub to coast to a complete stop before reaching inside.

• Failure to comply with these warnings could result in serious personal injuries.
• This washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will

automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this time.

SAVE THESE INSTRUCTIONS

3

Grounding type wall receptacle

Do not under any
circumstances cut, remove,
or bypass the grounding
prong from this plug.

Power supply cord with
3-prong grounding plug

Summary of Contents for Coin-Operated Commercial Tumble Action Washer




























Reviews: