HOW TO OPERATE YOUR
I
STEP 1. Load your dishwasher with dishes, silverware,
pots, pans, bowls, etc., according to the Loading section.
STEP 2. Add detergent to the detergent dispenser.
Make sure the Cycle Indicator Dial is at
position
before adding detergent. (See Detergent Guide).
Use rinse aid agent to help prevent spotting. Occasionally
check to insure that rinse agent container is at least
full. (See How to Use a Rinse Agent section).
STEP 3. Select drying option.
HEATED DRY. Turns the
drying heater on for fast drying.
NO HEAT DRY. Turns the
drying heater off to save energy.
The dishes will dry naturally over
a longer period such as overnight.
If you need your dishes sooner, open the dishwasher
door after the cycle is complete to reduce the natural
drying time.
Use of this option reduces the electrical energy used
by this model approximately 10%.
STEP 4. Select the wash
and start the dishwasher.
(See Cycle Selection
If your dishwasher drains into a food waste disposer,
operate the disposer until it is empty before starting
the dishwasher.
To obtain the benefits of a complete cycle,
be careful that you do not turn the dial any
farther than necessary to start the dishwasher.
I
●
For NORMAL WASH cycle:
a Latch the door.
b. Slowly turn Cycle Indicator
Dial to START position to
start the cycle. You will hear
the motor start. There is a time
WASHING
delay between the start-up
and the water fill so you will
not hear any wash action right away.
c. Latch door to
the cycle.
4