GE CIC Pro, Service Manual

Page: 65 / 314

Service interfaces
2026419-033E CIC Pro™ 4-5
Setup CIC with service access
Log on to Setup CIC with service access
1. From the multi-patient viewer, click Setup CIC .
2. Click the Service Password tab.
3. In the Password field, type mms_cic and press Enter .
Log off Setup CIC with service access
1. Click the close button ( X ).
2. When you are prompted if you want to exit out of Service Mode, click Yes .
Command-line interface access (for advanced users)
Log on to command-line interface from the clinical application mode
1. From the multi-patient viewer, click Setup CIC .
2. Click the Service Password tab.
3. In the Password field, type mms_com and press Enter .
Access command-line interface from the administrator mode
1. From the Windows taskbar, click Start > Run .
2. At the command prompt, type cmd and click OK .
Log off command-line mode
To exit command-line mode, click the close button ( X ).
1
The password for the Webmin logon can be changed from the default at the first logon. However, the password can only be reset by GE personnel
who are physically at the site, or remotely if the device is Insite ExC (Remote) connected. See Change the logon password for Webmin
on page 8-32.