GE Built-In Dishwasher, Owner'S Manual, Page: 19 / 32

19
The 3rd rack is also removable to allow extra large items to be placed in the upper rack.
Loading the Dishwasher
Dishwasher
To remove the 3rd rack:
1
Remove the silverware and utensil trays.
(See the IMPORTANT NOTES in this section.)
2
Push the rack all the way to one side so that
a gap between it and the side rail forms on
the other side. Align the side rail posts with
the center of the clips on the rack and lift
straight up.
3
Continuing to hold the rack in the lifted
position, repeat on the other side.
4
Once the rack is removed, push the side
rails all the way back into the dishwasher.
Pull rack all the way
out to lock it in place
To replace the 3rd rack:
1
Extend both side rails fully out of the dishwasher.
2
Orient the rack so that its side clips are aligned
and centered with the posts on the side rail and
lower the clips onto the posts.
3
Move the rack to one side of the dishwasher until
the clips fall onto the posts.
4
Continuing to hold the rack in the lifted
position, repeat on the other side.
5
Once the rack is replaced, pull it all the way
out to lock it in place in its side rails.
6
Replace the silverware and utensil trays.
Rail posts
on inside
of rails
Rail
Rack
Align rail posts with
rack clips - Pull rack up
Rack
clips
Push rack to
one side
Rail post
will slide
in or out
of this
opening
Rail
post
Rack
clip
Rail
Rack
clips
Rail
post
Rack
clip
Rail
Rack
clips
Rail
posts