background image

10

3.  Can I adjust volume when I am in the phone mode?

The volume keys can be adjusted in both music and phone mode.

4.  Why do I hear a beep from the headset?

The beep means the headphone is in low-power status. 
The headset will beep every 20 seconds to remind you to charge it. 
The red charging LED indicator also fl ashes to indicate low-power.

5.  Why do my headphones miss or drop phone calls?

Some phones require manual activation and deactivation of 
the call via the phone’s interface.

Specifi cations

Standard, Power Class

Bluetooth

®

 1.2 compliant, Class 2

Frequency Band 

2.402~2.480 GHZ unlicensed ISM band

Profi le Supported 

A2DP, AVRCP, Headset & Hands Free Profi les

Audio Format 

SBC

Rx Sensitivity 

< 0.1% BER at -80 dBm

RF Output Power 

-6dBm to 4 dBm

Sampling Rate 

48 KHz

SNR >85dB

Antenna embedded 

antenna

Working Distance 

Up to 30 feet in open space*

Power Supply 

350mAH Lithium Ion Battery

Operating Temperature 

-10 °C ~ +55 °C

Dimensions, Folded

70mm (L) x 95mm (W) x 60mm (H)

Dimensions, Unfolded

150mm (L) x 110mm (W) x 65mm (H)

Ear-to-Ear Distance

150mm Max.

Weight 

About 200 grams

*Note: The maximum operating range depends on the paired phone model, 
battery power, and environmental factors.

Summary of Contents for Bluetooth 99002












Reviews: