background image

 

 these instructions with the appliance.

OWNER:  Keep these instructions for future use.

Electrical 

 Please Read Carefully

For personal safety, this air conditioner 

must 

be

 

 outlet you

properly grounded.

plan to use is 

 a

Electrical requirements

2-prong 

 it is your

personal 

● 

Do not change the plug on the power cord of this

to have it 

 with a

air conditioner.

properly grounded
3-prong 

 

● 

Follow national 

 codes or 

 codes and

ordinances.

-...”. .

● 

 house wiring may present 

 

Do 

 under any 

 

 or

 a 

 electrician.

remove the 

 

 prong from the

 115-volt models 

 a 

 

 60 

power cord.

grounded 

 

 with a 15-amp time delay fuse

or circuit breaker.

 power 

 on these models has a 3-prong 

plug that mates with a standard 3-prong (grounding) 

 

 1) to

 the 

 of electric shock

 from 

 air 

Use of adapter plug 

 models 

 of potential 

 

 under 

conditions, we 

 

 against the use of

an adapter plug. However, if you 

 choose to use an

adapter, a 

 

 may be made where

 codes permit. Use a 

 adapter, 

 at

most 

 hardware stores and make sure the 2-prong

 

 is properly grounded 

 2). You 

have the circuit 

 by a 

 

 to

make sure the 

 is properly grounded

 you put the adapter

plug into the 

 

make sure the larger prong

 into the larger 

 This

provides the proper polarity
in the 

 of the

power cord For proper
grounding, you must 
screw the 

 to the

 

 the power cord from the 

always hold the adapter with one hand 

 palling the

plug with the other hand.   this is not done, the adapter
ground 

 is likely to break with repeated use.

 

 

 ground 

 

DO NOT USE 

 

 conditioner 

 a proper

ground has again been 

Use of 

 cords

 of potential safety 

 under certain

conditions, we strongly 

 against the use of an

extension cord. However, if you 

 choose to use an

extension 

 it is absolutely necessary that it be a

 3-wire 

 type appliance extension

cord. 

 

 rating of the cord in amperes

must be equal to or greater than the branch circuit 
shown on the rating nameplate of the 

 conditioner.

 using the 

 rover screw.

Screwing the adaptor to the cover screw 

 not ground

the air conditioner 

1. 

 

 is 

 grounded through

the house 

g; and

2. The rover screw is 

 and not 

6

Summary of Contents for AVV1O













Reviews: