GE AvantaPure Professional Series, Operation Manual

Page: 42 / 58

42
Rev H
The controller has the capability to produce a low level of chlorine
during the brine draw stage of regeneration. It can also sense if there
is any brine present during the time when brine draw is occurring. This
parameter can be adjusted to the following:
0 = Chlorine Generator with Salt Check disabled
1 = Salt Check only
2 = Chlorine Generator with Salt Check enabled
A chlorine generator refill control/cable kit, P/N 3001760, must be
installed for this function to work properly. After it is installed, select
the desired parameter and push SET to accept the selection.