GE AvantaPure Professional 263, Operation Manual

Page: 16 / 58

16
Rev H
To assemble the Media Tank:
1. If the floor under the media tank is uneven, the leveling feet may be
installed. Slowly lay the tank on its side. Press or tap the feet into the
pockets.
1. Stand the tank up and in position. Level as needed.
2. Remove cover by pressing in on the latch and lifting cover (Figure 4).
When the cover is removed, the valve is visable. Remove the power
adapter. It should be secured to the tank collar near the inlet/outlet
connections.
Figure 4
WARNING:
The media tank contains loose particles that will shift. If the tank is
turned upside down or laid back quickly, the particles may enter the valve. If
this happens, the valve may need to be disassembled and cleaned.
Press in
Lift