Window Installation Instructions
13
INSTALL THE CASE
IN THE WINDOW
Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
Thread two type C bolts into the support
brackets.
Slide the case into the window and lower
the window behind the top mounting rail.
Position the brackets on the case bottom so
they will be near the outermost point on the
window sill. Attach the support brackets to
each side of the case bottom using 4 type A
screws on each side. Adjust the leveling
bolts to touch the sill.
CAUTION:
Do not install this air
conditioner in a window if the type C bolts
do not contact the window sill.
6
A
B
INSTALL THE SECURITY
BRACKET AND THE FOAM TOP
WINDOW GASKET
Attach the security bracket with a type B
screw.
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
7
A
B
C
Window sash seal
Type C bolts
Type A screws
Window sill
Window sill
INSTALL THE CASE
IN THE WINDOW
(cont.)
Locate the 7 screw holes along the bottom
front edge of the case. Center the case, side-
to-side, in the window and mount it to the
window sill using 3 type B screws staggered
in the front and back rows if possible.
Extend the left and right accordion panels to
the vertical window sashes and attach with
4 type B screws.
6
C
D
Top mounting rail
Type B
screws
Type B screws
Type B
screws
