background image

14

31-5000276   Rev. 1

Staple your receipt here. Proof of the original purchase 

date is needed to obtain service under the warranty

.

•   

Damage from improper installation.

•   

Damage in shipping.

•   

Defects other than from manufacturing (i.e., 

workmanship or materials).

•   

Damage from misuse, abuse, accident, alteration, lack 

of proper care and/or regular maintenance, or incorrect 

electrical voltage or current.

•   

Damage resulting from floods, fires, wind, lightning, 

accidents or similar conditions.

•   

Damage from installation or other services performed 

by other than a licensed HVAC technician.

•   

Labor and related services for repair or installation of 

the Product.

•   

A Product purchased from an online retailer.

•   

Damage as a result of subjecting Product to an 

atmosphere with corrosives or high levels of 

particulates (such as soot, aerosols, fumes, grease).

•   

A Product sold and/or installed outside of the 50 United 

States, the District of Columbia, or Canada.

•   

Batteries for the controller and other accessories 

provided with the Product for installation (e.g., plastic 

hose).

•   

Normal maintenance, such as cleaning of coils, 

cleaning filters, and lubrication.

•   

For Product installed in non-owner occupied 

applications, Product that has not been maintained 

annually by a licensed HVAC technician (proof 

required).

For The Period Of: GE Appliances Will Replace:

5 year limited parts 

warranty

From the date of the 

original purchase

This limited warranty cover all defects in workmanship or material for the mechanical and 

electrical parts contained in the Product (“Defective Parts”) for a period of 5 years from the Date of 

Purchase. GE Appliances will provide new or refurbished parts, or a replacement for all or part of 

the unit, at its sole discretion, to your licensed HVAC technician installer. This warranty also covers 

all defects in workmanship or material for the unit controller for a period of 1 year. The remote 

controller is covered by 1-year accessory warranty. The ductless system is covered by standard 

warranty. GE Appliances will provide a new or refurbished controller, at its sole discretion.

7  year compressor 

warranty 

from the 

date of the original 

purchase

The compressor contained in this product is warrantied for a period of 7 years from the Date 

of Purchase. GE Appliances will provide a new or refurbished compressor, or a replacement 

for all or part of the unit, at its sole discretion, to your licensed HVAC technician installer.

For the product models listed on Attachment 1 (the “Product”), this Standard Limited Warranty is provided to the Original 

Owner of the Product:

WHAT IS THE DATE OF PURCHASE

WHO IS COVERED

HOW CAN YOU GET SERVICE

THIS WARRANTY DOES NOT COVER

The “Date of Purchase” is the date that the original installation is complete and all product start-up procedures have 

been properly completed and verified by the installer’s invoice. If the installation date cannot be verified, then the Date 

of Purchase will be sixty (60) days after the manufacture date, as determined by the Product’s serial number. You 

should keep and be able to provide your original sales receipt from the installer as proof of the Date of Purchase. In 

new construction, the Date of Purchase will be the date the owner purchased the residence from the builder.

Contact your licensed HVAC technician installer. All installation and service must be performed by a licensed HVAC 

technician. Failure to use a licensed HVAC technician for installation of this Product voids all warranty on this Product..

Owner occupied: The “Original Owner” of this product, which means the original owner (and his or her spouse) of the 

residence where the Product was originally installed. Subject to the law of the state or province where the Product is 

installed, this warranty is not transferable to subsequent owners or if the product is moved to a different residence after 

the initial installation. Non-owner occupied: This limited warranty is provided for product 1) installed in a) single family 

or multi-family non-owner occupied residential buildings, or b) non-industrial commercial applications, (such as office 

buildings, retail establishments, hotels/motels) where the product is not subjected to an atmosphere with corrosives 

or high levels of particulates (such as soot, aerosols, fumes, grease), and 2) if the product is maintained annually by 

a licensed HVAC technician (proof of annual maintenance is required). The “Original Owner” of the product, means 

the original owner of the building where the product was originally installed. For new construction, the purchaser of 

the building from the builder will also be considered an original owner. This warranty is not transferable to subsequent 

owners or if the product is moved to a different location after the initial installation. 

Limited Warranty

Summary of Contents for ASH109CRAWA

















































Reviews: