4
CAUTION / ATTENTION
Always wear safety gloves while handling light modules.
Portez toujours des gants de protection lorsque vous manip-
ulez les luminaires.
Installation
1
Install the support cables
A) At first end of light module, wrap non carabiner
end of support cable around structural member.
B) Pass carabiner through support cable loop to
create a noose.
Repeat with second support cable at other end of
light module.
Structural member
A
A
B
B
2
Install the light module
A) Attach first carabiner to the 1/4’’ round hole
on one side of the light module. Repeat on
other side of light module.
B) Ensure both carabiners are through the hole
and both gates are closed.
Hanging the Light Module
NOTE: Ensure greenhouse structures and members are rated for loads created by light modules and drivers.
Suitable min. 2 mm diameter suspension cable required to complete installation.
4
3
Rotate driver so that the brackets can engage
with the structural member. Lower driver into
position.
Lift driver so that the structural member is
between the brackets.
NOTE: The base driver mounting kit is for a 1 5/8’’ square structural member. For other structural
members, see accessories or contact your account manager.
Hanging the Driver
Driver output
