GE Appliances Profile JGB920, Technical Service Manual

Page: 11 / 30

– 9 –
Warming Zone
The warming zone, located in the center of the glass
cooktop, will keep hot, cooked food at serving tempera-
ture.
Remove Warming Zone Unit
1. Remove electrical power to the range. Turn off gas at
the main valve.
2. Raise the cooktop.
3. Disconnect 4 wires from the front of the unit.
4. Remove screws from 3 metal holding brackets at the
12, 36, and 60 positions marked on the unit.
5. Support the unit with one hand while easing back the
brackets with the other hand.
NOTE: To access the infinite switch for the warming
zone, remove the lower control panel.
Lower Control Panel Access
Remove Lower Control Panel
1. Remove electrical power to the range. Turn off gas at
the main valve.
2. Remove cooktop.
3. Remove all knobs by pulling them straight off the
stems.
4. Remove 4 screws (A) beside rear burner knobs.
5. Remove 2 screws (B) on top of lower control panel.
6. Carefully pull panel over stems.
NOTE: When the lower control panel is removed, wires
for the warming drawer, warming zone, and burner
ignition are accessible for repair.
GEA00125
A
B B
A
B B
GEA00338
Temperature Limiter
Heating
Element
Collar
Flat Metal
Crimped "Ribbon"
Zig Zag Pattern
Support Tray for
Heating Element