FOR SERVICE TECHNICIAN ONLY—DO NOT REMOVE OR DESTROY
175D6149P002
DETAILS FUNCTION
Requirement
Sequence
t01
none
Start
Displays defined Model id (1-6); displays “---” if new board (to set Model id, rotate knob until desired id (1-6)
displayed, press and hold “START” key to program this model)
Power
Returns to “t01”
t02
none
Start
Displays most recent error code (E00=none)
Start
Displays previous error code (up to previous 10)
Hold start
Clear all error codes (and then displays E00)
Power
Returns to “t02”
t03
none
Start
Alternate “UL” and UL software version
Start
Alternate “cod” and Control Software version
Start
Alternate “EE” and eePROM version
Start
Alternate “Inv” and Inverter Software version
Power
Returns to “t03”
t04
none
Start
Loops on lighting LED’s, LCD, and cycle ids
Any button
Beeps when depressed
Power
Returns to “t04”
t05
none
Start
Displays “P” and pump for 60 seconds
Power
Returns to “t05”
t06
none
Start
Displays “E” (for Empty) and starts filling when reaches Foam level—displays “F”
Start
Fill, when reaches Main level—displays “nl”
Start
Fill, when reaches overflow level—briefly displays “OF,” pumps out, displays “E” when tub empty
Power
Returns to “t06”
t07
Main level
pressure
switch must
work
Start
For GFWH1100, GFWN1200, GFWN1300, GMAN1200 models:
Displays temperature in °F, turns on cold water (CV1) for 10 seconds, turns off CV1 and turns on HV for a maximum
pressure time-out of 5 minutes
For GFWH1200, GFWH1300, GFWH1400, GFWH1405, GFWS1500, GFWS1505 models:
Displays temperature in °F, turns on the CV and fills the tub until the Main level switch closes. Turn on the heater for a
maximum of 5 minutes
Power
Pumps out water and returns to “t07”
t08
none
Start
Displays “SEA” and rotates the basket at 43 revolutions per minute (only for GFWS1500 and GFWS1505 models
Power
Stops rotating the basket, turns off the steam and returns to “t08”
t10
none
Start
Displays “tt” and tumbles tub alternating the direction every 5 seconds
Power
Stops tumbling and returns to “t10”
t11
none
Start
Spins to 400 RPM displaying increasing RPM
Start
For GFWH1100, GFWN1200, GFWN1300, GMAN1200, GFWH1200, GFWH1300 models:
Spins to 1000 RPM (displays A00)
For GFWH1400, GFWH1405, GFWS1500, GFWS1505 models:
Spins to 1100 RPM (displays B00)
Power
Stops spinning and returns to “t11” when stops
t12
none
Start
Displays “ddt” and turns on HV to fill detergent compartment (for GFWH1100, GFWN1200, GFWN1300, GMAN1200,
GFWH1200, GFWH1300 models)
Displays “pdt” and turns on HV to fill Pre Wash compartment (for GFWH1400, GFWH1405, GFWS1500, GFWS1505 models)
Start
Displays “bdt” and turns on CV2 to fill bleach compartment (for GFWH1100, GFWN1200, GFWN1300, GMAN1200, GFWH1200,
GFWH1300 models)
Displays “ddt” and turns on HV to fill main dispensing compartment (for GFWH1400, GFWH1405, GFWS1500, GFWS1505
models)
Start
Displays “Fdt” and turns on CV1 and CV2 to fill softener compartment (for GFWH1100, GFWN1200, GFWN1300, GMAN1200,
GFWH1200, GFWH1300 models)
Displays “bdt” and turns on CV to fill bleach compartment (for GFWH1400, GFWH1405, GFWS1500, GFWS1505 models)
Start
Displays “HCt” and turns on CV1 and HV to fill detergent compartment (for GFWH1100, GFWN1200, GFWN1300, GMAN1200
GFWH1200, GFWH1300 models)
Displays “Fdt” and turns on CV to fill softener compartment (for GFWH1400, GFWH1405, GFWS1500, GFWS1505 models)
Power
Pumps out water and returns to “t12”
t13
none
Start
Starts EOL test sequence (NOT used in Repair)
Power
Returns to “t13”
6