GE Appliances GFDN110 Owner'S Manual Download Page 4

4

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

YOUR LAUNDRY AREA

„

 Keep the area underneath and around your 

appliances free of combustible materials (lint, paper, 

rags, etc.), gasoline, chemicals and other flammable 

vapors and liquids.

„

 Keep the floor around your appliances clean and 

dry to reduce the possibility of slipping.

„

 Close supervision is necessary if this appliance is 

used by or near children. Do not allow children to 

play on, with or inside this or any other appliance.

„

 Keep all laundry aids (such as detergents, bleaches, 

etc.) out of the reach of children, preferably in a 

locked cabinet. Observe all warnings on container 

labels to avoid injury.

„

 Never climb on or stand on the dryer top.

„

 

Keep the area around the exhaust opening 

and adjacent surrounding areas free from the 

accumulation of lint, dust and dirt. 

„

 If you see water on the floor around the dryer, call 

for service.

„

 Do not spray any type of aerosol into, on or near 

dryer at any time.

WHEN USING YOUR DRYER

„

 Never reach into the dryer while the drum is moving. 

Before loading, unloading or adding clothes, wait 

until the drum has completely stopped.

„

 Clean the lint filter before each load to prevent lint 

accumulation inside the dryer or in the room. 

DO 

NOT OPERATE THE DRYER WITHOUT THE LINT 

FILTER IN PLACE.

„

 Do not wash or dry articles that have been cleaned 

in, washed in, soaked in or spotted with combustible 

or explosive substances (such as wax, oil, paint, 

gasoline, degreasers, dry-cleaning solvents, 

kerosene, etc.) which may ignite or explode. Do not 

add these substances to the wash water. Do not use 

or place these substances around your washer or 

dryer during operation.

„

 Do not place items exposed to cooking oils in your 

dryer. Items contaminated with cooking oils may 

contribute to a chemical reaction that could cause a 

clothes load to catch fire.

„

 Any article on which you have used a cleaning 

solvent or that contains flammable materials (such 

as cleaning cloths, mops, towels used in beauty 

salons, restaurants or barber shops, etc.) must 

not be placed in or near the dryer until solvents or 

flammable materials have been removed. There are 

many highly flammable items used in homes such 

as acetone, denatured alcohol, gasoline, kerosene, 

some household cleaners, some spot removers, 

turpentines, waxes, wax removers and products 

containing petroleum distillates.

„

 The laundry process can reduce the flame 

retardancy of fabrics. To avoid such a result, 

carefully follow the garment manufacturer’s care 

instructions.

„

 Do not dry articles containing rubber, plastic, foam 

or similar materials such as padded bras, tennis 

shoes, galoshes, bath mats, rugs, bibs, baby pants, 

plastic bags, pillows, etc., that may melt or burn. 

Some rubber materials, when heated, can under 

certain circumstances produce fire by spontaneous 

combustion.

„

 Do not store plastic, paper or clothing that may burn 

or melt on top of the dryer during operation.

„

 Garments labeled 

Dry Away from Heat

 or 

Do Not 

Tumble Dry

 (such as life jackets containing kapok) 

must not be put in your dryer.

„

 Do not dry fiberglass articles in your dryer. 

Skin irritation could result from the remaining 

particles that may be picked up by clothing during 

subsequent dryer uses.

„

 To minimize the possibility of electric shock, unplug 

this appliance from the power supply or disconnect 

the dryer at the building’s distribution panel by 

removing the fuse or switching off the circuit breaker 

before attempting any maintenance or cleaning 

(except the removal and cleaning of the lint filter). 

NOTE:

 Pressing 

Power, Start

 or 

Lock

 does 

NOT

 

disconnect the appliance from the power supply.

Summary of Contents for Appliances GFDN110





























































Reviews: