background image

Care and Cleaning

Cleaning your
air conditioner

Turn air conditioner off and
remove the plug from the wall
outlet before cleaning.

Grille & Cabinet

Wipe both sides of grille with a
clean cloth lightly dampened with
mild liquid 

 detergent,

or clean with a vacuum cleaner
brush. Be careful not to force the
movable louvers out of position.

Other areas behind the grille may
be wiped or vacuumed, taking care
not to damage the coil fins.
Wash cabinet with mild soap or
detergent and lukewarm water.
Never use strong chemicals,
solvents or bleaching agents.

Condenser Coils

These coils on the weather side
of the unit should be checked
periodically and cleaned if clogged
with dirt or soot from the atmosphere.
If extremely soiled, they may need
to be steam 

 a service 

through your General Electric service
outlet.

Air Filter

The air filter behind the front grille
should be checked and cleaned at
least every 30 days or as often as it
needs cleaning.

To remove  the filter:

Grasp the tab at the bottom 

 side

of the unit and pull downward.

Clean the filter with a vacuum
cleaner to remove light dust. Wash
the filter in lukewarm, soapy water
and rinse in clear water to remove
sticky dust.

When replacing the filter, be sure
the word FRONT is facing you as
you slide the filter back into place.

Front Grille Removal

If your air conditioner is mounted
flush inside the room or if the
window sill extends farther into the
room than the chassis, it may be
necessary to remove the front grille
before the filter can be removed.

1. Grasp the bottom of the 

and swing it toward you about 
degrees.

2. Slide the grille upward to
disengage it from catches on the

upper part of the chassis.

The air filter can now be removed
from the grille—grasp the tab on
the filter and pull.

After cleaning, replace the air filter
and grille, hooking the top of the
grille onto the top of the cabinet
and pushing the bottom of the grille
in until it snaps into place.

6

Summary of Contents for ANM12









Reviews: