background image

Electrical 

 

 Read 

How to connect

230/208-volt perpendicular,

electricity

tandem or large tandem type wall
outlet. These types of outlets are

For personal safety,

available at most hardware stores.

this appliance must be
properly grounded.

Electrical 

115-volt models  require a 

volt a.c., 60 

 grounded outlet

protected with a 15 amp time delay
fuse or circuit breaker.

The power cord on these models has
a three-prong (grounding) plug that
mates with a standard three-prong
(grounding) wall outlet (Fig. 1) to
minimize the possibility of electric
shock hazard from these appliances.

Where a standard two-prong wall
outlet is encountered, it is your

230/208-VOLT

MATCHING

PERPENDICULAR TYPE WALL OUTLET

LINE CORD PLUG

REQUIRES 20 AMP TIME DELAY FUSE

OR CIRCUIT BREAKER 

230/208-VOLT

MATCHING

TANDEM TYPE

WALL OUTLET

LINE CORD PLUG

REQUIRES 15 AMP TIME DELAY FUSE

OR CIRCUIT BREAKER 

 

230/208-VOLT

MATCHING

LARGE TANDEM TYPE WALL OUTLET

LINE CORD PLUG

REQUIRES 30 AMP TIME DELAY FUSE

OR CIRCUIT BREAKER PROTECTION

I

TEMPORARY METHOD

(ADAPTER PLUGS NOT
PERMITTED IN CANADA)

 ,

ALIGN LARGE

“ \

PRONGS/SLOTS

I ‘~\”” 

 “ --

 

 

 

 

/

 INSURE PROPER

 AND

FIRM CONNECTION

Fig. 2

BEFORE USE

The 

 slot in the adapter must be

aligned-with the larger 

 in the wall

outlet to provide proper polarity in
the connection of the power cord.

CAUTION: Attaching the adapter
ground terminal to wall outlet cover
screw does not ground the 

 cover screw is metal, and not

insulated, and 

 outlet is grounded

through house wiring. You should
have the circuit checked by a qualified

electrician to make sure the outlet

is properly grounded.

When disconnecting the power cord
from the adapter, 
always hold the
adapter with one hand. If this is not
done, the adapter ground terminal is
very likely to break with repeated use.

Should the adapter ground
terminal break, DO 

 USE the

appliance until a proper ground
has again been established.

personal responsibility and 
to have it replaced with a properly

Whether your air conditioner is a

grounded three-prong wall outlet.

115-volt or a 230/208-volt unit, it

is 

 to have the wall

Use of 

 cords

DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG FROM
THE POWER CORD.

230/208-volt models  require their
own single branch circuit supplying
230/208-volt a.c., protected with a
time delay fuse or circuit breaker.
This is recommended 

for 

performance and to prevent
overloading house wiring circuits,
which could cause a possible fire
hazard from overheating wires.

The power cord on these models
has a 230/208-volt perpendicular,
tandem or large tandem type plug
that mates respectively with 

 and circuit checked by a

qualified electrician if there is
any doubt as to whether a proper
ground exists.

Use of adapter plug

 models only)

Because of potential safety hazards
under certain conditions, we
strongly recommend against use

of an adapter plug. However,

if you still elect to use an adapter,
where 

 codes permit, a

TEMPORARY CON 
may be made to a properly grounded
two-prong wall outlet by use of a

 listed adapter (Fig. 2) available

at most local hardware stores.

Because of potential safety
hazards under certain conditions,
we strongly recommend against the
use of an extension cord. 
However,
if you still elect to use an extension
cord, it is absolutely necessary that
it be a 

   

 3-wire grounding

type appliance extension cord and
that the current carrying rating of
the cord in amperes be equal to or
greater than the branch circuit size

shown on the rating nameplate of
the appliance.

Summary of Contents for ANK12D









Reviews: