AMX−4+ OPERATION
GE MEDICAL SYSTEMS
(MODEL 2169360, 2236420 & 2275938 SERIES)
REV 10
om 2166913−100
4−3
Steps
To drive the AMX−4+, follow these steps:
1. Make sure that the telescoping arm is in the
park/transport
position and that the
battery charging cord is unplugged and fully retracted.
D
In the park/transport position the telescoping arm is:
a.)
completely
pushed in;
b.)
centered over the control panel (collimator skin spacers
within well); and
c.)
securely latched. See Illustration 4−3.
ILLUSTRATION 4−3
PARK/TRANSPORT POSITION
2. Turn the keyswitch to
ON
, if necessary.
OFF
ON
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
