GE Amersham Typhoon Operating Instructions Manual Download

Page: 79 / 144

Availability

Function

Part

Pre-scan and scan

Image display settings, see

Image display settings,

on page 79

Pre-scan

Click Back to return to the previous window or click
Scan to start a scan.

Scan

Export Display, Print, and Save as functions to ex-
port, print and save images.

Image display settings

Function

Button

Selects the magnification (ratio) at which the image is displayed.

Zooms in and out of the displayed image.

Selects the colors that are used to display the image, for exam-
ple:

Black and white display of intensity
levels based on a gray-scale.

Negative Gray

Choose this option after a scan to view
multiple scans in different colors.

Multi Color

Selects the type of tone curve used in the intensity graph.

The light intensities are displayed using
an exponential tone curve.

Exponential

The light intensities are displayed using
a linear tone curve.

Linear

The light intensities are displayed using
a sigmoid (S-shaped) tone curve.

Sigmoid

Tip:

It is recommended to use the linear curve setting

Amersham Typhoon Operating Instructions 29193226 AC

4 Amersham Typhoon Control Software

4.6 View Image mode

Summary of Contents for Amersham Typhoon

















































































































































Search results

Summary of Contents for Amersham Typhoon

Reviews:

Related manuals for Amersham Typhoon

Brands by name

Popular brands

GE Amersham Typhoon, Operating Instructions Manual

Search results

Summary of Contents for Amersham Typhoon

Reviews:

Related manuals for Amersham Typhoon

Brands by name

Popular brands