To disarm to level 1 using a wireless touchpad:
1. Press Disarm and enter your access code.
Arming level 2
There are times when you want intrusion protection, but still want the freedom to
move around inside your home without setting off an alarm. In this situation, set your
system to level 2 (doors and windows) to turn off the interior motion sensors.
Note:
To arm to level 2 from level 3, you must first disarm and then rearm the system.
To arm to level 2 using the panel keypad:
1. Close all protected perimeter doors and windows.
2. Press Arm once.
The panel displays
Enter Code to ARM
.
3. Enter your access code.
The panel displays
EXIT TIME XX and Lock Doors and Windows
. The
system sounds two beeps.
4. If you are leaving the premises, exit through a designated delay door before the
delay time expires.
Note:
If the quick arm feature is on, an access code is not required to arm the system
to level 2.
To arm to level 2 using a keychain touchpad:
1. Press Lock.
The system sounds two beeps.
To arm to level 2 using a wireless touchpad:
1. Press Arm Doors and Windows and enter your access code.
10
Allegro Control Panel User Manual
