GE Allegro, Installation Instructions Manual

Page: 40 / 44

Appendix B: Reference Tables
34
Check marks (
√
) represent characteristics present in a group.
* This group is not certified as a primary protection circuit for UL-listed systems and is for supplementary use only.
† Sounds instant police siren if two or more sensors are tripped within 4 minutes. Otherwise sensors are followers to
delayed
sensors. If Alarm Verification is on, group 18 functions like group 17.
‡ This group has not been investigated by UL.
a
The DTIM will report in all levels.
Siren Type:
Police - A high level steady siren.
Fire - A high level temporal siren.
Silent -No siren.
Emergency - A low level on-off patterned siren.
Delay:
Instant -A sensor of this type will cause an immediate alarm if a violation occurs anytime in an active arming level.
Standard - A sensor of this type will cause an entry delay if a violation occurs anytime in active arming level. A violation
during an exit delay will not cause an alarm.
If the arming level modifier No Delay is enabled a sensor of this type will cause an immediate alarm if the violation occurs
during an active arming level.
Follower - A sensor of this type will cause an immediate alarm if a violation occurs during an active level unless an entry
or exit delay is in progress. If violated during an entry delay and the entry delay expires the sensor will go into alarm.
Table B7: Sensor Group Characteristics (Continued)
No. Name Application Alarm Delay
Re
s
tora
l
Supe
rv
iso
ry
CS Re
port
Chim
e
Active
Levels
Table B8: System Settings
Menu Name Default Parameters Settings
Account 00-000 4-10 digits; 0-9, A-F
Number 1 none 24 digits; 0-9, *, #, pause
FMT - CID/SIA CID On=CID, Off=SIA
High LVL On off, on
Low LVL On off, on
Openings Off off, on
Closings Off off, on
Number 2 none 24 digits; 0-9, *, #, pause
FMT - CID CID On=CID, Off=SIA
High LVL Off off, on
Low LVL Off off, on
Openings Off off, on
Closings Off off, on
Backup On off, on
Dial DLY 30 15-120
Pre-dial String none 8 digits; 0-9, *, #, pause
DTMF Dial On off, on
Number none 24 digits; 0-9, *, #, pause
DL Code 12345 5 digit code, 0-9
Install Code 4321 4 digit code, 0-9
Dealer Code none 4 digit code, 0-9
Duress Code none 4 digit code, 0-9
Manager Code none 4 digit code, 0-9