1.3.4
Other regulations and standards
Introduction
This section describes the standards that apply to the ÄKTA pure system.
Environmental conformity
This product conforms to the following environmental requirements.
Standards, machinery and
electrical equipment
Standard requirements fulfilled by this product are summarized in the table below.
Description
Standard
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
EN ISO 12100
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
EN 61010-1, IEC 61010-1,
UL 61010-1, CAN/CSA-
C22.2 No. 61010-1
Electrical Equipment for Measurement, Control, and
Laboratory Use-EMC requirements-Part 1: General re-
quirements
EN 61326-1
(Emission according to CISPR 11, Group 1, class A)
Industrial, Scientific and Medical (ISM) Radio Frequency
Generators (Canada)
ICES-001/NMB-001
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equip-
ment in the frequency range 9 kHz to 25 MHz and induc-
tive loop systems in the frequency range 9 kHz to 30
MHz; Part 2: Harmonized EN covering the essential re-
quirements of article 3.2 of the R&TTE Directive
EN 300 330-2
Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3: Spe-
cific conditions for Short-Range Devices (SRD) operating
on frequencies between 9 kHz and 246 GHz
EN 301 489-3
12
ÄKTA pure Operating Instructions 29022997 AF
1 Introduction
1.3 Regulatory information
1.3.4 Other regulations and standards
