GE AKTA Prime Plus Instructions Download Page 4

GE, imagination at work and GE monogram are trademarks of General Electric Company. 

ÄKTA and Drop Design are trademarks of GE Healthcare companies. 

All goods and services are sold subject to the terms and conditions of sale of the company within GE Healthcare which supplies them. A copy of these 
terms and conditions is available on request. Contact your local GE Healthcare representative for the most current information.

© 2008 General Electric Company – All rights reserved. 
First published Mar. 2008

GE Healthcare Europe Gmbh
Munzinger Strasse 5
D-79111 Freiburg
Germany 

GE Healthcare UK Ltd 
Amersham Place
Little Chalfont
Buckinghamshire, HP7 9NA 
UK

GE Healthcare Bio-Sciences Corp
800 Centennial Avenue
P.O. Box 1327
Piscataway, NJ 08855-1327
USA

GE Healthcare Bio-Sciences KK
Sanken Bldg. 3-25-1
Hyakunincho
Shinjuku-ku, Tokyo 169-0073
Japan

For contact information for your local office,  
please visit  
www.gelifesciences.com/contact

GE Healthcare Bio-Sciences AB
Björkgatan 30
751 84 Uppsala
Sweden

www.gelifeciences.com

Instructions  28-9360-01 AA  03/2008

imagination at work

 

 

Elanders i Uppsala 2008

Summary of Contents for AKTA Prime Plus

Page 1: ...t light To prevent injury to eyes disconnect the power to the monitor before removing the UV lamp Preparations 1 Turn off the main power to the instrument 2 Disconnect the UV lamp power cable from the instrument 3 Remove the UV monitor unit from the instrument Installing the UV Hg lamp 1 On the lamp housing remove the two screws on the end plate that is attached to the power cable ...

Page 2: ...mble the lamp and the washer so that the holes for the screws are visible Note The Hg lamp function is independent of how the lamp is turned because the light is equally strong in all directions 5 Secure the end plate with the two screws Installing the UV Zn lamp 1 On the lamp housing remove the two screws on the end plate that is attached to the power cable ...

Page 3: ...ate with the two screws Connecting the UV lamp 1 Assemble the UV monitor unit on the instrument 2 Connect the UV lamp power cable to the instrument Handling waste This symbol indicates that the waste of electrical and electronic equipment must not be disposed as unsorted municipal waste and must be collected separately Please contact an authorized representative of the manufacturer for information...

Page 4: ...pany All rights reserved First published Mar 2008 GE Healthcare Europe Gmbh Munzinger Strasse 5 D 79111 Freiburg Germany GE Healthcare UK Ltd Amersham Place Little Chalfont Buckinghamshire HP7 9NA UK GE Healthcare Bio Sciences Corp 800 Centennial Avenue P O Box 1327 Piscataway NJ 08855 1327 USA GE Healthcare Bio Sciences KK Sanken Bldg 3 25 1 Hyakunincho Shinjuku ku Tokyo 169 0073 Japan For contac...

Reviews: