4
About the controls on the air conditioner.
Features and appearance may vary.
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
■
To ensure proper operation, aim the remote
control at the signal receiver on the air
conditioner.
■
The remote control signal has a range of
up to 20 feet.
■
Make sure nothing is between the air conditioner
and the remote control that could block the
signal.
■
Make sure batteries are fresh and installed
correctly as indicated on the remote control.
Controls
ON/OFF Pad
Turns air conditioner on and off.
Increase
▲
/Decrease
▼
Pads
Use to set temperature when in
Cool
mode.
Mode
Use to set the air conditioner to
Cool
or
Fan
mode.
Fan Speed Pad
Use to set the fan speed to
LOW (F1),
MED (F2)
or
HIGH (F3).
Timer Pad
ON—
When the air conditioner is off,
it can be set to automatically come on in
1 to 12 hours at its previous setting. Each
touch will set the timer in hours.
OFF—
When the air conditioner is on,
it can be set to automatically turn off in
1 to 12 hours. Each touch will set the timer
in hours.
To cancel the timer,
press the
Timer
pad
until the display time disappears.
Remote Control Signal Receiver
Display
Shows the set temperature or time remaining
on timer.
Remote Control
Remote Control
In the case of a power outage or interruption, the
unit will automatically re-start in the settings last
used after the power is restored. If the
Timer
feature was set, it will resume its countdown.
You may need to set a new time if desired.
Power Outage Recovery Feature
Fan
Only on
Cool on
Timer on
Air Conditioner Controls
This cool-only air conditioner was not designed for
freezing outdoor conditions. It must not be used in
freezing outdoor conditions.
Do Not Operate in Freezing Outdoor Conditions
