GE AF-600, Installation And Start-Up Instructions Manual, Page: 21 / 26

DEH40638 AN 10-2100, Rev.01, 10/20/2010
In-Warranty Information Form
The purpose of this form is to provide specific information to GE Drives to aid in
expediting part replacement and/or troubleshooting assistance for AF-600 FP
Redundant Drive panels. The following information is required prior to any assistance
being provided.
Panel Model Number :
Panel Serial Number :
Start-Up Date:
Failure Date:
I. Application Information:
Input Transformer: _____ kVA Wiring distance between motor & drive ______ ft.
Power Factor Correction Capacitors: _____ Yes ( _______ Microfarad) _____ No
Other Equipment on Same Power: _____ Yes _____ No
If Yes, what? ______________________________________________________
II. Function Code Different From Factory Settings:
FC Setting FC Setting
III. Failure Message:
Latest Fault Previous Fault
IV. Status When Failure Occurred (check one):
_____ Power Up _____ Running _____ Inverter Mode _____ Bypass Mode
V.
Description Of Failure:
______________________________________________________________________________
______________________________________________________________________________
21