GE 94931 Instruction Manual Download Page 16

15

Problem

No response after 
pressing a key

Sleep feature does 
not work

Reprogramming may be required after batteries
are removed.

90 Day Limited Warranty

Jasco Products Company warrants this product to
be free from manufacturing defects for a period of
ninety days from the original date of consumer pur-
chase.  This warranty is limited to the repair or
replacement of this product only and does not
extend to consequential or incidental damage to
other products that may be used with this unit.  This
warranty is in lieu of all other warranties express or
implied.  Some states do not allow limitations on
how long an implied warranty lasts or permit the
exclusion or limitation of incidental or consequen-
tial damages, so the above limitations may not
apply to you.  This warranty gives you specific
rights, and you may also have other rights which
vary from state to state.   If unit should prove defec-
tive within the warranty period, return prepaid with

Solution

A) Make sure you have 

new batteries, and you
are aiming your
remote at 
your devices.

B) Check that batteries

are properly installed.
See page 2.

Remote must remain
aimed at television after
sleep is set in order for it
to work.

94930 Revised Size 1/22/02  4/15/04  5:19 PM  Page 16

Summary of Contents for 94931




































Reviews: