Setting Clock
8
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Use only appliance-type bulb
with a maximum of 40-watt or equivalent
for replacement. To prevent hazard, do
not operate light without the cover.
DISC PLAYER
OFF RADIO
Hz
kHz
fer
OFF
MINUTE
SET
HOUR
TIMER ON/SET
STOP
REPEAT
TRACK
SEARCH
SHUFFLE
PLAY/PAUSE
CD
The countertop light switch is located on the side
of the unit, and has three settings: HI, LO, and
OFF.
Using the Countertop Light
Replacing the Bulb
1. Unplug the unit cord from the AC power
outlet.
2. Unlatch the cover to open it.
3. Unscrew and remove the bulb.
4. Install the replacement bulb.
5. Swing the cover up and snap it in place.
6. Plug the cord into the AC outlet, and reset the
clock.
• For dimmer light, move the light switch to the
LO position.
• For more illumination, switch to HI.
• To turn the light off, place Light switch to OFF.
Setting the Time
The time display has a 12-hour format with AM
and PM indicator. To set the time:
1. Press
SET
to enter time setting mode.
The red Clock icon will appear on the
display.
2. To set clock time, use the
TRK (SEARCH•TUNE)
/ buttons to
select the correct time.
Press and hold to fast forward or fast reverse
clock time.
3. Press
SET
again to save clock time. The red
Clock icon will turn off.
Setting the Countdown
Timer
1. Press
TIMER ON/OFF
to enter timer setting
mode.
The red
TIMER
icon will flash on the display.
2. To select countdown time, use the
TRK (SEARCH•TUNE)
/ buttons to
select the correct time.
Press and hold to fast forward or fast reverse
countdown time.
3. Press
TIMER ON/OFF
again to activate the
timer. The unit will beep twice to indicate
countdown has started.
The red
TIMER
icon will remain lit during
countdown.
4. Press
TIMER ON/OFF
to turn timer off at any
time or after it has sounded.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
The radio or CD player is muted
when alarm turns on.
EN
Untitled-1
2/7/03, 10:08 AM
10