Client:
PIL (Wal*Mart)
Project:
169164
Language: EN
Date:
06.03.2008
Version:
08
Page:
11
(of 14 pages)
11
Barcode: 690 5039 10 000 7 00243
CLEANING
Automatic clean function
The coffee maker is equipped with an automatic clean function. After 60 brewing cycles,
the
clean
indicator/button
(22)
lights up. This indicates coffee maker should be cleaned
by using the automatic clean function and the charcoal filter
(17)
should be replaced.
NOTE:
The coffee maker can continue to be used, when
clean
indicator/button
(22)
is
on.
•
To begin the cleaning cycle, remove the charcoal filter
(17)
from the water tank
(10)
. Fill the tank with a vinegar and water mixture (1/2 vinegar and 1/2 water) or a
descaling product. Press
clean (22)
button for three seconds. The
clean
indicator/
button
(22)
flashes and the cleaning process begins.
Cleaning process:
•
24 cycles of 7 seconds brewing and 21 seconds off
•
30 minutes rest
•
Brewing the remaining descaling solution
•
After cleaning process is complete the
clean
indicator/button
(22)
goes off. Fill water
tank
(10)
with clean water and run one brewing cycle to rinse the coffee maker.
•
Change the charcoal filter
(17)
(ill.
k
)
. Reinsert the charcoal filter to the coffee
maker
(ill.
l
).
NOTE:
You can use the cleaning function before reaching 60 cycles (especially if the water
hardness is above normal). Press and hold
clean
indicator/button
(22)
for 3 seconds.
NOTE:
The Cleaning Process takes 60 minutes to complete. You cannot cancel the
cleaning process before it is complete. Unplugging the machine only delays the cleaning
process.
